UTM Up2Date 9.107 Released

A new Up2Date is available for Sophos UTM fixing several bugs. Amongst others we fixed some issues around WiFi and RED and also will perform firmware updates for those devices. A full list and details on how to apply UTM 9.107 can be found by reading on.

Sophos UTM 9.107

News

  • Bugfix release

Remarks

  • System will be rebooted
  • Configuration will be upgraded
  • Connected REDs will perform firmware upgrade
  • Connected Wifi APs will perform firmware upgrade

Bugfixes

  • 21794 Support UTM 9 install on ASG 120 Rev4 with 2GB Memory
  • 22571 UTM-RED Client with dynamic IP doesn’t re-establish the tunnel
  • 23727 Wifi: it should not be possible to set the same Mesh name twice
  • 24059 Aua fails to handle customized user group attributes
  • 24430 Sporadic reboots probably caused from sip helper
  • 24572 Automatic Monitoring shows Uplink Interface as ONLINE although it is down
  • 25219 If Inline PGP decryption fails the customer is getting an empty mail
  • 25323 Obviously wrong traffic counting
  • 25459 WiFi Separate Zone: Suddenly it’s not possible to process traffic via the AP due to incorrect RED peer address
  • 25492 Policy routing not working together with full transparent mode of HTTP proxy
  • 25572 Default gateway for DSL interface not set probably in link failover setup
  • 25657 Do not imply filename and next-server when specifying DHCP options 66/67
  • 25910 [e1000] Reset Adapter after Update to 9.100 and some Intel Interfaces
  • 25931 False Positive during WAF Upload
  • 25940 Several core dumps in __kernel_vsyscall (/usr/apache/bin/httpd -k restart)
  • 25980 DHCP server does not provide IP address if address pools are used
  • 26077 WAF real server is switching to error state every 5-10 min without any known reason
  • 26273 Improvement of Notification Information in notifier.log
  • 26388 RED50 Traffic not possible, red_server reports “Unable to get proc entry”
  • 26450 Upon upgrade, “The web filtering URL regular expression object with the name ‘Any domain expressions’ already exists”
  • 26656 RAS Manager is not able to change or create SSL VPN Profiles
  • 26850 Default gateway for PPPoE interface not set after reconnect
  • 26929 If username contains a ‘\’ SSL VPN config is not stored correctly on the client
  • 26933 hotspot doesn’t work in an active active cluster environment
  • 27084 high cpu load from postgres. Caused from pfilter reporter
  • 27198 Not possible to decrypt an email if there are more than one empty lines between header and body
  • 27253 Search Engine reports do not work if uppercase domain name is used
  • 27362 SAA doesn’t work for AD users
  • 27421 Disabled RED devices are always able to establish a connection to the UTM
  • 27455 Adding an additional interface to PPPoE interface takes it down
  • 27473 Visit of ZDF mediathek will cause a display bug in websec reporting.
  • 27479 mdw died on UTM100/110 if QoS is enabled without a selector
  • 27597 red_server dies after RED reconnect – no further connection possible until UTM reboot
  • 27685 New Packetfilter block rules doesn’t work for established connections
  • 27777 WiFi: Radius packets which should be going to a server routed via IPSec goes out on external interface
  • 27789 RED status overview not matching real tunnel status
  • 27862 User accounts with less then 3 characters in the username are not consider from the reporting
  • 27865 Transparent Split mode doesn’t resolve names correctly on RED50
  • 27887 [e1000e] Reset adapter unexpectedly
  • 27910 Unable to configure the HTTP default profile in the global section caused by AP connected via RED
  • 28053 swap partition did not get a UUID
  • 28223 The websecurity manager is not able to change or create some proxy settings
  • 28323 Unable to create or change any additional address at the ASG
  • 28327 HTTP Proxy segfault in PCRE match()
  • 28413 Multipath is routing packets on wrong interface after one load balanced ipsec connection fails
  • 29164 UTM failover although the syncing process is not finished (prefered master option enabled)
  • 29900 RED50 freeze after update to 9.107 SR
  • 29954 Endpoint: Not working anymore after update to 9.107 SR

Download:
While you do not need to manually download Up2Date packages (they will automatically download and prepare themselves for you to install), for manual application of Up2Dates or for UTM installations without Internet connections, you can retrieve them using the link below.

Download Link: ftp://ftp.astaro.de/UTM/v9/up2date/u2d-sys-9.106017-107033.tgz.gpg
MD5 Sum: e234126ffb6602e48c60d2ffc3e13130
Size:  ~127MB

Up2Date Installation: Sophos Up2Date technology makes it easy to upgrade your Sophos UTM to the latest version. There are two ways to apply an already-downloaded Up2Date package to the system:

1. Log on to WebAdmin, navigate to Management >> Up2Date >> Overview and use Update to latest version now to install the Firmware Up2Date. Click on the “Watch Up2Date Progress in new window” and an extra browser window will show the progress of the Up2Date installation. (The System administrator will receive a notification email once the Up2Date process has finished.)

2. Download the Up2Date package from our HTTP or FTP Server and install it under Management >> Up2Date >> Advanced:

Sophos UTM Up2Date FTP Mirrors:

Feedback

  • If you want to provide feedback or want to discuss any of the UTM V9 features you should post it on our User Bulletin Board. Please indicate the version you are using to help us (and everyone helping you).
  • If you have any feedback on our help, manual, or any documentation (Online Help) please send it to nsg-documentations@sophos.com.
  • You are free to use our new demo server environment without hassle, nags, or registration. Enjoy!

Eric Bégoc
Senior Product Manager